Staffix Evo

The Evo Staffix system is highly innovative as it allows you to lay a tiled surface with only two elements: Screw and Screw Cap. The transparent and ergonomic cap allows the installer to level the tiles with no effort. At the same time, thanks to its transparency, it’s easy to check the area, preventing any glue from escaping the tile joint. In addition, the patented Evo Staffix system levels and distances the tiles without damaging or scratching them. The transparent cap  can be re-used, while the screws are disposable.

Dimensions: 1 / 1.7 / 2 mm thickness

Ideal for: Laying tiles

TRANSPARENT

permits to check under the cap preventing the glue from exiting

ERGONOMIC

Easy to use and ergonomic: the cap can be adjusted with hands with no extra tool.

LINEAR

The linear element is used to level the tiles from the edges.

T ELEMENT

The T element is used to level the tiles when installed staggered.

CROSS ELEMENT

The Cross element is used to level four tiles from the corners. It is used in caso of a linear installation.

CLASSIC VERSION

STAFFIX is also available in the classic version.

installation

  • INSTALLATION


    Apply the screws with the desired thickness when laying the tiles. screw the cap and tighten avoiding to let the glue come out from the joints. Leave the glue to rest for 24 h and then remove.

  • warnings


    Remove the leveling system only after at least 24 hours. Use your feet or a mallet and hit sideways along the direction of the glue

100 Pcs

BUSTA

20×15 cm
H 30 cm

30 packs per box

BOX
80×120 cm
H 145 cm

GET INSPIRED